Simulators
Practice field testing before the outage
Hands-on training modules for field procedures, meter setup, lead placement, sequence discipline, and report quality.
Modules
9
Reports Saved
0
Best Score
--
Breaker Testing
480V Breaker - Ductor + Megger
Practice a professional LV breaker sequence after the safety hold point: reset/close, contact resistance, phase-to-ground, phase-to-phase, open-contact insulation, and final report.
Attempts
0
Completed
0
Best
--
Breaker Testing
480V Breaker - Primary Injection
Practice a full LSIG primary-injection sequence on a 480V breaker after the safety hold point: settings review, per-phase pickup checks, trip timing, and ground-fault return setup.
Attempts
0
Completed
0
Best
--
Medium Voltage Testing
5/15kV Vacuum Breaker - NETA-Style Tests
Practice medium-voltage vacuum breaker checks: gap/wipe explanation, contact resistance, phase-to-ground insulation, phase-to-phase insulation, open-contact bottle highpot, and grounding discipline.
Attempts
0
Completed
0
Best
--
Transformer Testing
Transformer TTR Simulator
Practice a padmount transformer workflow after the safety hold point: neutral/ground isolation, insulation resistance checks, then TTR lead placement and ratio review.
Attempts
0
Completed
0
Best
--
Instrument Transformers
Instrument Transformers - CT/PT Ratio + Polarity
Practice CT and PT ratio/polarity setup after the safety hold point: secondary shorting, fuse isolation, burden awareness, and clear field notes.
Attempts
0
Completed
0
Best
--
Medium Voltage Testing
MV Cable - VLF Test
Practice a VLF cable test setup: prove absence of voltage, isolate terminations, ground inactive phases, connect HV output to the conductor under test, and return on shield/ground.
Attempts
0
Completed
0
Best
--
Switchgear / Switchboards
Switchboard Bus - Ductor + Megger
Practice switchboard bus testing after the safety hold point: remove metering/fuses, open breakers, isolate loads, ductor bus joints, and megger bus insulation.
Attempts
0
Completed
0
Best
--
ATS / Switchgear
ATS - Load + mV Drop Transfer
Practice energized ATS meter proof, load readings, contact millivolt-drop checks, source transfer, emergency-side readings, and retransfer documentation.
Attempts
0
Completed
0
Best
--
Relay Testing
SEL Relay - CMC 256-Style Test Set
Practice a deep SEL relay workflow with a CMC 256-style training set: as-found files, current outputs, binary trip timing, 50/51 phase, 50/51 ground, and troubleshooting failed results.
Attempts
0
Completed
0
Best
--
Recent Simulator Reports
Complete a simulator to start building your local training profile.